DXF vs PDF Sewing Patterns: Which File to Buy for Production
A PDF sewing pattern is a print-ready file: you print it at 100% scale, cut it and sew, but you cannot edit it. A DXF/AAMA pattern is a CAD file that opens in programs such as Optitex, Audaces, Gerber AccuMark or Lectra Modaris, where you can change the pieces, adjust the grading, build markers and plot at any width. Buy PDF if you cut by hand; buy DXF if you work in a CAD system or plan to.
Modeltex production guide. Updated on Nov 13, 2026.
The short answer: PDF to print, DXF to edit
Pick the file by how you cut, not by how professional it sounds:
- Choose PDF (A4 or plotter) if you print the pattern and cut by hand, with no CAD software.
- Choose DXF/AAMA if you use an apparel CAD system and want to edit pieces, change a size, build markers or send the pattern to a plotter or an automatic cutter.
- Many workshops start with PDF to sample and cut the first runs, and ask for the CAD file when they buy their first CAD system.
What a PDF sewing pattern is
A PDF pattern is the drawing of the pieces at true size, ready to print. The A4 version is split into numbered sheets that you print at home and tape together; the plotter version is one long page at the width of a roll (90, 120 or 150 cm, about 35, 47 or 59 in) that a print shop prints with no taping. Both carry a control square so you can check the scale with a ruler.
What a PDF cannot do is change: you cannot move a notch, add a seam allowance, correct a curve or add a size, because the file is a picture of the lines, not a pattern a program understands. For hand cutting that is exactly what you need, and it is the fastest way to start.
What a DXF/AAMA file is
DXF is a CAD exchange format: it stores every piece as real geometry (lines, curves and points with true dimensions). AAMA is the apparel convention for DXF, named after the American Apparel Manufacturers Association, which defines how the pieces, notches, grainlines and internal lines are labeled so that patternmaking programs can read them as pattern pieces and not as loose lines.
Because the data is vector geometry with real units, a CAD system can edit the piece, grade it, nest it into a marker for your fabric width and plot it at any size. The CAD files of Modeltex include the full size range of the pattern.
PDF and DXF side by side
The practical differences, one by one:
- Opens in: PDF opens in any PDF viewer and prints anywhere; DXF opens in apparel CAD systems (and in general drawing programs, without the notches and grainlines).
- Editing: PDF cannot be edited as a pattern; DXF can be edited piece by piece.
- Sizes: PDF prints the sizes you chose; DXF carries the full size range as separate outlines in the same file.
- Markers: a PDF is cut piece by piece from a paper layout; a DXF can be nested into a computerized marker (MRK or PLT) for your fabric width to cut with minimum waste.
- Learning curve: a PDF needs a printer and a ruler; a DXF needs CAD software and someone who knows it.
- Delivery on modeltex.fashion: PDF A4 and plotter are bought directly from the catalog; DXF/AAMA is ordered on request.
Which programs open DXF patterns
The apparel systems that import DXF/AAMA include Optitex, Audaces Moldes, Gerber AccuMark and Lectra Modaris, and 3D programs such as CLO also import it. General drawing programs such as Inkscape can open a DXF too, but they read it as plain lines: you lose the piece names, notches, grainlines and the size nesting, so they are fine to look at a file and poor for production.
Each program has its own import menu and its own habits with units and layers; the guide on how to import a DXF pattern walks through Optitex, Audaces, Gerber and Lectra step by step.
PDS, ADS, PLT and MRK: the other CAD files
PDS is the native pattern format of Optitex and ADS is the native format of Audaces: they keep more information than a DXF (grading rules, for example) but only open in their own program. PLT is a plotter file that sends the lines to a plotter, and MRK is the marker format of Optitex: the pieces already arranged on the width of your fabric.
If you do not use Optitex or Audaces, DXF/AAMA is the safe choice, because almost every apparel CAD system reads it.
How to order a DXF pattern from Modeltex
Choose the pattern in the catalog and ask for the CAD format you need (DXF/AAMA, PDS or ADS) from the product page or the contact page. The file comes with the full size range, and the price is quoted on request. If you only want to print and cut, order the PDF directly from the product page.
Tell us which program and which version you use when you order, so the file is exported in the way that imports cleanly.
Mistakes to avoid with DXF patterns
Most problems appear in the first import and are easy to check:
- Wrong units on import (millimeters read as centimeters or inches): measure one piece against the dimensions on the product page.
- Assuming the seam allowance is or is not included: check it on one piece before grading or nesting.
- Importing a DXF into a drawing program and expecting notches and grainlines to behave as pattern data.
- Opening the file, editing it and printing without measuring the control square on the printed sheet.
Frequently asked questions
Is DXF better than PDF for sewing patterns?
Neither is better: they do different jobs. PDF is better to print and cut by hand without software; DXF is better if you use apparel CAD and want to edit the pattern, grade it or build markers.
Can I convert a PDF sewing pattern to DXF?
Not reliably. A PDF is a drawing of the pieces, so converting it means tracing the lines again and rebuilding notches, grainlines and sizes by hand, which is what digitizing a paper pattern is. If you need a CAD file, ask for the pattern in DXF/AAMA instead of converting the PDF.
What does AAMA mean in a DXF pattern?
AAMA stands for the American Apparel Manufacturers Association. A DXF/AAMA file follows the apparel convention for labeling pieces, notches, grainlines and internal lines, which is why patternmaking programs read it as a pattern and not as a plain drawing.
Does a DXF pattern include all the sizes?
The CAD files of Modeltex include the full size range of the pattern, with each size as its own outline in the same file.
Can I print a DXF pattern?
Yes, from a CAD program: you open the file, check the scale and plot it. If you do not have CAD software, order the PDF (A4 or plotter), which is made to print.
Do I need Optitex or Audaces to use a DXF pattern?
No. DXF/AAMA opens in most apparel CAD systems, including Gerber AccuMark and Lectra Modaris. PDS and ADS are the native formats of Optitex and Audaces and only open in those programs.
Related
- DXF/AAMA patterns for Optitex and Audaces
- How to import a DXF pattern in your CAD program
- Digital patternmaking formats: which one fits
- Computerized markers (MRK)
- PDF sewing patterns to print, cut and produce
- How to digitize paper patterns
More guides
- Digital Patternmaking Formats: Which Fits Your Workshop or Factory
- How to Import a DXF Pattern in Optitex, Audaces, Gerber and Lectra
- Optitex to Audaces: How to Export and Convert DXF Patterns
- Free Digital Patternmaking Software: Seamly2D, Valentina and Inkscape
- How to Digitize Paper Patterns: Methods and Checks for Production
- Design Tech Pack for a Garment Workshop: Template and Sections
Sewing patterns ready for production, with the full size range, in the Modeltex catalog.